Back to Resumes List
Shipboard Officer / Personnel / Crew
OBJECTIVE . ....
Outstanding gas turbine and support systems technician with over 13 years background in the power plant field.
Intent on perceiving a position where my adopt skill of gas turbine operation and maintenance will be utilized to
increase company productivity.
KEY QUALIFICATIONS
● STCW - International:
● III/4 : Rating Form Part of an Engineering Watch (RFPEW) .
● III/5: Able Seafarer – Engine.
● V/1-1: Basic Oil and Chemical Tanker Cargo Operations.
● VI/1: Basic Training
● VI/2: Proficiency in survival craft other than fast rescue boats (PSC)
● VI/3: Advanced Firefighting
● VI/4: Medical First-Aid Provider
● VI/5: Vessel Security Officer
● VI/6: Vessel Personnel With Designated Security Duties / Security Awareness
● Domestic-National Capacity
● Qualified Member of the Engine Department, Limited to Electrician/Refrigerating Engineer,
Fireman/Watertender, Junior Engineer and Oiler
● Tankerman Assist
● Lifeboatman
● Ordinary Seaman
● Stewards Department (F.H.)
● Engineering Duty Officer (EDO) January 2015
● Oil King February 2014
● Propulsion and Auxiliary Control Console Operator February 2014
● Electrical Plant Control Console Operator February 2014
● Engine Room Operator February 2014
● Propulsion System Monitor February 2014
USS Jamie E Williams (DDG-95) Norfolk, Virginia January 2014 - October 2016
Gas Turbine Mechanical Leading Petty Officer
● As an Engineering Duty Officer (EDO) was responsible to supervised plant alignment and light off,
quality assurance of fuel and lube oil and watch standing.
● As an Ship Oil King was responsible for the testing of the ship fuel and refueling helicopter, onloading
and offloading of ship fuel & lube oil and transfer fuel throughout the ship.
● As a Propulsion and Auxiliary Control Console Operator was responsible for monitoring 4 LM2500
General electric engine for pressure, temperature, speed and casually control.
● Supervised 9 subordinates.
● Responsible for over 1000 maintenances (Gas turbine engine, lube oil pump, fuel pump, low pressure
compressor, lube and fuel purifier, JP-5 fuel system .).
● Responsible for maintaining 2 LM2500 engines and 1 Rolls Royce Allison K34 engine.
● Monitoring plant with 2 LM2500 engines and Roll Royce Allison K34 engine.
● As an Engine Room Operator supervised and monitor temperature, pressure, vacuum, speed, oil gauges.
● Utilizing the engineering operating sequence system for plan operation and casually control.
Assault Craft Unit Four (ACU-4) Little Creek, Virginia December 2010 - January 2014
Quality Assurance Inspector, Maintenance Technician
● Overseen and assisted the overhaul of 15 Auxiliary Power Unit, 10 gearbox , 10 propeller and 35 lift fan
on-board Landing Craft Air Cushions saving the navy over 10.7 million in contractor cost.
● 2 years forklift operator experience.
● Enforce strict safety and Quality Assurance standards.
USS Sullivans (DDG-68) Mayport, florida January 2007 - December 2010
Gas Turbine Mechanical Leading Petty Officer
● As a Propulsion and Auxiliary Control Console Operator was responsible for monitoring 4 LM2500
General electric engine for pressure, temperature, speed and casually control.
● Supervised 5 subordinates.
● Responsible for over 900 maintenances (Gas turbine engine, lube oil pump, fuel pump, low pressure
compressor, lube purifier ).
● Responsible for maintaining 2 LM2500 engines and 1 Rolls Royce Allison K34 engine.
● Monitoring plant with 2 LM2500 engines and Roll Royce Allison K34 engine.
● As an Engine Room Operator supervised and monitor temperature, pressure, vacuum, speed, oil gauges.
● Utilizing the engineering operating sequence system for plan operation and casually control.
Technical Training/Certifications
Ship Propulsion Fuel/ Lube Oil/ Jet Fuel System 11 - 15 May 2014
Quality Assurance 21 - 24 July 2013
Safety Program Afloat 23 - 28 April 2012
Commercial driver license 27 January - 15 March 2012
Crane Rigger and Rigging Gear August 2011
United Services Military Apprenticeship Program(Power Plant Operator) March 2011
Landing Craft Air Cushion Propulsion & Lift System 15 November - 17 December 2010
Gas turbine mechanical, Class “A ” 14 June - 28 July 2004
Honors
● Navy and Marine Corps Achievement Award 23 January 2015
● Navy and Marine Corps Achievement Award 21 January 2014
● Navy and Marine Corps Achievement Award 21 October 2010
● Navy and Marine Corps Achievement Award 28 April 2009
● Navy and Marine Corps Achievement Award 18 September 2006
● Sea Service Deployment Award (7 )
● Naval Good Conduct Award (4)
SKILLS
● Attention to detail
● Respect for others
● Self-discipline
● Performance under pressure
● Adaptability
● Problem solving
● Time management
● Teamwork
LANGUAGES
English
Summary
● Leadership, creative ability, and self-confidence to excel at any task. Safely led a nine team members in
accomplishing maintenance and jobs at USS James E. Williams (DDG-95)
● Trained sailors to improve in mission effectiveness. Team Builder, inspires cooperation and progress.
● Always producing exceptional work. No rework required. Using knowledge to solve complex technical
problems.
● Power Plant Supervisor duty. Manage personnel for time critical maintenance schedules, scheduling and
conducting individual and group training, safety compliance etc…
● Assigned Gas Turbine Technician duty. All aspects to include operation repair and performance of
organizational and intermediate maintenance on mechanical components of gas turbine engines,
propulsion and auxiliary equipment.
● Proven ability to implement and exercise first aid and safety standards to personnel and work area.
● Recognized for trustworthiness, reliability, and integrity as evidenced by the awarding of a Department
of Defense Secret Clearance based upon a thorough background investigation.
● Coordinate Gas turbine and support systems maintenance using computer applications to include
borescope inspection, gas turbine compressor wash maintenance, and pump logic.
View Contact Information